Not long ago, the administrator accidentally saw a report of medical device accessories. This report predicts that the global medical device market will grow at a rate of 4% to 6% in the next few years, which directly leads to its medical Precision parts market will also increase significantly. Some experts believe that in the next few years, my country's medical device market will further expand and has broad prospects. Medical device processing companies urgently need to break through the dilemmas of small scale, low technical content, insufficient R&D investment, and financing difficulties. In addition, some people said that although China's medical device industry is developing rapidly, the prospects are broad, but if Chinas medical device companies cannot break through and cherish some of the bottlenecks in current development, they will miss the opportunity for development . What are the bottlenecks for domestic medical device processing companies?
   First, my country has a large number of medical device companies, small scale, and weak competitiveness. Similar to China's pharmaceutical industry, although there are a large number of medical device companies in China, more than 90% are small companies, and few companies have sold more than 100 million. Most companies can only survive in the low-end market, or provide for foreign companies. Precision parts. Experts believe that the medical device industry is a multi-disciplinary, knowledge-intensive, capital-intensive high-tech technology industry, and the entry barrier is relatively high. Chinese enterprises must recognize their own strengths in terms of talents, funds, technology, management, etc. in order to compete. There is a place for development.
Secondly, the technical content of domestic medical devices is not high, and the high-end market is occupied by foreign companies. Statistics show that the current domestic medical device share in the high-end market is less than 1/3, which is inversely proportional to the number of previous medical device companies. There is a considerable gap between products and foreign companies in service life and product quality. Judging from the basic composition of my country's medical device market after so many years of development, high-end products account for only a quarter, while low-end products account for three-quarters. In contrast, in the international medical device market, high-end products generally account for 55 percent of the market, and low-end products account for only 45 percent. This leads to the phenomenon that there are many monks and few monks. So many domesticMedical device partsThe products produced by an enterprise can only grab a 45% share of the product worldwide, which is definitely a manifestation of such a phenomenon, and foreign enterprises are not in many, but in the high-end nature of the product, so foreign Of medical device accessories companies have little competitiveness, but the products they produce occupy 55% of the market. Can you imagine how big the gap is? Compared with foreign-funded medical device companies, domestic medical device companies are more vulnerable. Taking CT equipment as an example, in 2010, five companies GE, Siemens, Philips, Neusoft and Toshiba accounted for 92% of the domestic market share; in terms of MRI equipment, GE, Siemens and Philips accounted for more than 50% of the domestic market share. The domestic one is almost blank. As long as you consider that this is basically the majority of foreign countries, you can imagine how much it will lose for domestic companies?
Third, there is a shortage of funds, and corporate financing is difficult, making it even harder to grow bigger. my country's medical device companies have little tangible capital and a small amount of assets, resulting in a serious shortage of R&D investment, accounting for only 3%. Domestic enterprises mainly finance domestic resources, especially small and medium-sized private enterprises are very difficult to apply for subsidies and loans, basically without technical financial support. There are also many problems in venture capital, mainly due to the industry's temptation to design this piece of limelight. Therefore, experts suggest that the Ministry of Science and Technology's Innovation Guidance Fund should be used to mobilize social capital to participate in the establishment of the profession industry fund, and cooperate with the Ministry of Science and Technology's independent projects to support the development of enterprise innovation. At the same time, it is recommended to set up a special evaluation platform for the conversion of medical device achievements to cooperate with technology financial services. In addition, local governments and technology parks should support the mergers and acquisitions of leading enterprises in the field and promote the formation of industrial clusters. As a result, the spring of the medical device industry will not be far away.
    Technological progress and equipment upgrading will also bring demand to the market. Industry experts analyzed that with the advancement of technology, China's medical device product structure will also be adjusted, so a large number of previous medical devices will slowly be eliminated, followed by new medical devices, the production of these devices will inevitably need A large number of Precision parts. The function of medical devices extends from simple diagnosis, treatment, and laboratory type to diagnosis, treatment, inspection, analysis, rehabilitation, physiotherapy, massage, health care and other functions. It will continue to adjust the structure of medical device products and expand its market. The utilization rate of parts is greatly increased than before.
    In addition, in the next few years, my country will give priority to the purchase of domestic medical devices in the procurement of medical devices. During the "Twelfth Five-Year Plan" period, my country will effectively guide medical institutions to use domestic medical devices through economic means. In the current centralized procurement projects carried out by the Ministry of Health, the winning bidders are mainly made in China. In the future, when formulating equipment configuration standards and arranging equipment investment in grass-roots medical institutions, we will adhere to the calculation based on relatively low-priced domestic medical devices to promote Priority is given to local procurement of domestic medical devices. Therefore, domestic medical device manufacturers and accessory manufacturers must seize the opportunity and pay close attention to quality. You must do the business at least at your doorstep. In addition, such a set of policies will change the small and medium-sized enterprises in a certain way. Funding issues are more than one thing.

< BR>Medical device parts produced by domestic enterprises

This article Address:https://www.professionalmanufacturing.com/shownews.asp?id=71